Skip to content
Laser design guide

Fits & tolerances

Pick the material and thickness — you see the cut accuracy and how wide to draw the slot.

Example: Plywood 4 mm → accuracy ± 0.15 mm, slot 4.05 / 4.15 / 4.30 mm (tight / snug / loose).

Try the example

1. Material

2. Sheet thickness

3. Cut accuracy

Part size accuracy ± 0.15 mm

4. Draw the slot for a joint this wide

Tight (press in)3.05mm
Snug (by hand)3.15mm
Loose (slides)3.30mm

We compensate the laser burn (0.20 mm) for you. Draw the size you want.

S T
T = thickness of the sheet that goes in
S = slot width you draw (from step 4)

Plywood — accuracy and slot width

Thickness Accuracy Tight Snug Loose
3 mm ± 0.15 3.05 3.15 3.30
4 mm ± 0.15 4.05 4.15 4.30
5 mm ± 0.20 5.05 5.15 5.30
6 mm ± 0.20 6.05 6.15 6.30
8 mm ± 0.30 8.05 8.15 8.30
10 mm ± 0.30 10.05 10.15 10.30

Acrylic — accuracy and slot width

Thickness Accuracy Tight Snug Loose
3 mm ± 0.10 3.05 3.10 3.20
4 mm ± 0.10 4.05 4.10 4.20
5 mm ± 0.15 5.05 5.10 5.20
6 mm ± 0.15 6.05 6.10 6.20
8 mm ± 0.20 8.05 8.10 8.20
10 mm ± 0.20 10.05 10.10 10.20