Zigzag text fill
Type a text or open a logo — the letters are filled with a line the laser engraves fast and clean.
Tutorials
How to use the Laser studio
Click a title to read the steps. “Try it” opens the tool in the studio above.
Open a file and move around the drawing
Every tool works on one drawing. Open a picture or vectors once — no downloading and uploading between steps.
- Click Open or drop a file on the drawing (PNG, JPG, SVG, DXF, PDF, AI). A picture from the clipboard: Paste or Ctrl+V.
- Click an object to select it. Drag to move it, the handles change the size, the round handle rotates.
- “What to do with it” appears on the right — click what you need.
- The view: mouse wheel = zoom, right mouse button or Pan = move, Fit = the whole job.
Tip: Made a mistake? Undo (Ctrl+Z) takes back every step.
Picture or logo to vector (even a blurry one)
The laser cuts lines (vectors). Turn a PNG or JPG logo into clean curves to cut or engrave.
- Open the picture and click Bitmap. At the top choose “Logo / drawing”.
- Step 1 — Clean up the picture: only for a small, blurry or noisy picture. Turn on “Smooth jagged edges”, and “Remove noise” if needed.
- Step 2 — Reduce the colours: 2 = black / white (the cleanest cut), more colours = every colour its own layer. The preview on the drawing shows the result.
- Step 3 — Choose what to cut: pick the background (white, black, or Pick backgr. by clicking the picture).
- Step 4 — click Vectorise. The vectors appear where the picture was.
Tip: Jagged or frayed edges? Step 1 “Smooth jagged edges” and vectorise again — the earlier vectors are replaced.
Photo to line art (colouring page)
A portrait, a pet or a building as clean line art — fast to engrave and it looks hand-drawn.
- Open the photo and click Bitmap. At the top choose “Photo”.
- Step 1 — Pick a style: Auto is a good start, then Fine, Bold, Coloring page, Sketch.
- Step 2 — Adjust the lines: fewer lines = “Line amount” down, thicker lines = “Line thickness” up. The preview changes at once.
- Step 3 — Vectorise (the lines as vectors) or “Make picture” (a PNG to engrave).
Tip: A photo with a plain background and good light works best.
Text to curves
The laser does not know your font. Text as curves looks the same everywhere — no missing fonts.
- Click Text and choose “Text to curves”.
- Type the text (more lines = Enter), pick a font — 15 fonts or your own .ttf / .otf / .woff file.
- Set the font size in mm, the spacing and the alignment.
- Click Add text. You can edit it later — select it and change it.
Tip: Font size = the letter height in mm. For engraving wood keep letters at least 3 mm high.
Welded text — a name in one piece
A cake topper, name plate or wall sign: the letters join, so one piece is cut and it does not fall apart.
- Click Text and choose “Welded text” (or select a finished text and click “Weld into one piece” on the right).
- Type the name and pick a font — script fonts (Pacifico, Lobster…) join best.
- Under the text you see “1 piece ✓”. If it says more pieces, turn on “Bar under the letters” or “Join loose parts automatically”.
- Click Add text, then Export.
Tip: Dots over i and accents are loose bits — “Join loose parts automatically” attaches them with a link.
Weld shapes into one piece
Overlapping shapes (a logo in several parts, a heart and letters) become one outline, so the laser does not cut inside.
- Select the shapes — click, Shift + click adds more, or drag a window over them.
- On the right click “Weld into one piece”.
- The message says “1 piece ✓”, or how many pieces there are if some shapes do not touch.
Tip: Holes stay (the inside of an O). Open lines cannot be welded — close them first in the Fill tool.
Cut line around (sticker, outline)
A sticker, badge or stand needs a cut line a little away from the motif. Offset draws it for you.
- Select a picture, text or logo and click Offset.
- Set “Distance from the motif” in mm. The dashed preview shows the line.
- For a picture with a plain background keep “Detect the background” on.
- Click Add cut line — a new red object to cut appears.
Tip: For stickers 1.5–3 mm. Then continue with Print & cut.
Fill for engraving (zigzag, hatch, dots)
Instead of a full raster the letters are filled with a line — faster to engrave and it looks hand-drawn.
- Select a text, logo or any closed shape and click Fill.
- Click a pattern: Zigzag, Hatch, Cross-hatch, Wave or Dots.
- Set “Lines across the height” — the spacing in mm shows next to it (0.4–1 mm suits most wood). Then the angle and the hand-drawn wobble.
- Export: the fill is its own layer “… engrave” in its own colour, before the cut line.
Tip: A shape shows in coral and is not filled? It is not closed — pick a gap and click “Close shapes”.
Bridges — parts do not fall out
Small parts and the insides of letters (O, A, D) would fall out or move after cutting. A short bridge holds them.
- Select the object and click Bridges.
- Set how many “Per outer line” and “Per inner line” (inner = a hole, e.g. inside an O).
- Click on a line to add an extra bridge, click a bridge to remove it.
- Bridge width: 1 mm is a good start, more for thick material.
Tip: A letter stencil: 2 bridges on every inner line.
Print & cut — print first, then cut
Stickers and printed parts: print the sheet with marks, the laser camera finds the marks and cuts exactly on the line.
- Prepare the picture and its cut line (Offset).
- Click Print & cut, choose the paper and the mark size.
- Click Place marks.
- Download the “Print sheet” (PDF, print at 100 %) and the “Cut file” (SVG or DXF) for the laser.
Tip: Always print at 100 % (not “fit to page”), or the marks will not match.
Export and order
Download the finished drawing for your laser, or send it straight to us to make.
- Click Export (Ctrl+E).
- Pick the format: SVG (LightBurn), DXF, DXF with splines (SolidWorks), PDF, PNG or EPS. And the whole job or only the selection.
- Click Download.
- Or Use in order — the file goes into the order form on this page.
Tip: Every colour = its own layer. In the laser software set it to cut or engrave.
Keyboard shortcuts
Work faster on a computer.
- Ctrl+Z undo · Ctrl+Y redo · Ctrl+O open · Ctrl+E export · Ctrl+V paste
- Ctrl+A select all · Ctrl+D duplicate · Delete delete · arrows move 1 mm (Shift = 10 mm)
- 1–7 tools (1 Select, 2 Bitmap, 3 Text, 4 Offset, 5 Fill, 6 Bridges, 7 Print & cut)
- F fit · + / − zoom · Space + drag = pan · R rotate 90° · M mirror
Tip: Shortcuts work while the mouse is over the studio.